Plastic mold for thin table candles 30 x 2.2 cm

High-quality plastic mold designed for candle making. Can be used many times, the mold is strong and long-lasting.

Technical information:

Dimensions: 30 x 2.2 cm.

Use instructions

To ensure the candle is properly formed and the wax does not leak out, the mold must be prepared before use:

1. The hole at the bottom – for the wick

The mold has a special hole at the bottom through which the wick is inserted.

2. The bottom of the mold must be sealed

Before pouring the wax, the bottom must be sealed tightly.
Suitable for sealing:

• soft adhesive putty, for example plasticine,
• adhesive sealing putty,
• a strong rubber band or silicone tape.

It is important to make sure there are no gaps — this prevents the wax from leaking out.

3. Insert the wick

• Insert the wick through the bottom opening.
• Press it against the sealing material so it stays stable.
• Straighten the top and hold it in place, for example with a wick holder, so it remains centered.

4. Place the mold on a flat surface

The mold must stand steadily so the candle sets evenly.

5. Pour in the wax and leave it to set

Pour slowly and allow the wax to fully harden. The candle can be removed from the mold only once it has completely set.

6. Reusable mold

After use, wash with lukewarm water and a mild detergent. Do not use sharp tools or strong chemicals.